EasyManuals Logo

EINHELL GH-KS 2440 User Manual

EINHELL GH-KS 2440
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
GB
- 21 -
Always wear heavy duty working gloves
Swing open the loading funnel (Fig. 5/Item
2) by opening the release screw (Fig. 5/ Item
12).
Undo the fastening nut (Figure 6a/Item B)
Undo the eight Philips screws (Figure 6b/Item
C) and remove the cover plate
Secure the rotary disk so that it cannot rotate
(for example by jamming it with a screwdriver,
see Figure 6c)
Undo the four blade screws (Figure 6c/Item
D) and remove the blades (Figure 6c/Item E)
Each of the blades can be turned once as
they are ground sharp on both ends. Then
they must be replaced by new blades.
To assemble, proceed in reverse order.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council o ces.
Anl_GH_KS_2440_SPK7.indb 21Anl_GH_KS_2440_SPK7.indb 21 29.04.13 09:0529.04.13 09:05

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EINHELL GH-KS 2440 and is the answer not in the manual?

EINHELL GH-KS 2440 Specifications

General IconGeneral
Power2000 W
Noise level112 dB
Maximum power2400 W
Product colorBlack, Red
Cutting systemBlade
Number of blades2
Rated speed (max)4500 RPM
Material throughput- kg/h
Collection box capacity- L
Package width625 mm
Package weight12700 g
Weight and Dimensions IconWeight and Dimensions
Depth480 mm
Width280 mm
Height650 mm
Weight11200 g

Related product manuals