9
GB
9. Storage
9.1 Equipment
Store the equipment and its accessories out of
children’s reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 5 and 30 °C. Store the
equipment in its original packaging.
9.2 Liquid gas cylinder
■ Never store the liquid gas cylinder inside the
house, in rooms below ground level or in
non-ventilated areas!
■ The valves on the liquid gas cylinder must
have valve guard caps and lock nuts.
■ Gas cylinders must be stored upright, even
when they are empty.
10. Connection diagram (Fig. 3)
Q1 ON/OFF switch
F1 Fuse-thermostat
M1 Fan motor
Y1 Thermoelectrical ignition guard (gas valve)
Y2 Safety solenoid valve
B1 Thermal element
B2 Piezo ignition
B3 Ignition electrode
B4 Burner
11. Technical data
Rated thermal load: max. (Hi) 30 kW
Air throughput: 500 m
3
/h
Gas consumption: G 31: 2150 g/h
Equipment category: I3P
Country of destination: GB/IE
Type of gas: Standard propane
Operating pressure P: 1500 mbar (propane)
Mains connection: 230 V ~ 50 Hz, 0.17 A, 38 W
Temperature class: 76°C
12. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused
or recycled. The equipment and its accessories
are made of various types of material, such as
metal and plastic. Defective components must
be disposed of as special waste. Ask your
dealer or your local council!
For EU countries only
Never place any electric power
tools in your household refuse.
To comply with European Directive 2002/96/EC
concerning old electric and electronic
equipment and its implementation in national
laws, old electric power tools have to be
separated from other waste and disposed of in
an environment-friendly fashion, e.g. by taking
to a recycling depot.
To Next Page
Loading...
