9
GB
Wear safety goggles
Ꮯ Wear ear-muffs
Directions for use
The wet-and-dry grinder is equipped with a dry
grinding wheel and a wet grinding wheel. Please
note that you should always use the dry grinding
wheel for rough grinding jobs. Precision grinding, on
the other hand, should be performed with the wet
grinding wheel, applying the workpiece to the wheel
with only slight pressure. The wet-and-dry grinder
was developed for the grinding and sharpening of
knives, scissors, chisels and tools with cutting edges.
Fitting the glass guard
Fit the glass guards to the two hood guards as
shown in the picture.
Maintenance
앬 Important! Pull out the power plug first.
앬 Remove dust and dirt regularly from the
machine. Cleaning is best carried out with a fine
brush or a cloth.
앬 Never use caustic agents to clean plastic parts.
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
앬 Type of machine
앬 Article number of the machine
앬 Identification number of the machine
앬 Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
To Next Page
Loading...
