To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-DH 43 and is the answer not in the manual?
General| Input power | 1600 W |
|---|---|
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Impact energy (max) | 43 J |
| Idle impact rate (max) | 1800 IPM |
| Product color | Black, Red |
Weight and Dimensions| Depth | 680 mm |
|---|---|
| Width | 159 mm |
| Height | 332 mm |
| Weight | 14600 g |
| Package weight | 21600 g |
Details the main components of the demolition hammer as illustrated in Figure 1.
Lists the contents of the package and instructions for checking completeness.
Explains the correct attachment and adjustment of the additional handle for improved stability.
Provides step-by-step instructions for inserting and securing the chisel into the tool chuck.
Outlines the procedure for safely removing the tool from the demolition hammer.
Describes how to activate and deactivate the demolition hammer using the control switch.
Offers advice for optimal performance, including chisel sharpening and proper handling.
Details the procedures for cleaning the equipment to ensure its longevity and proper functioning.
Addresses the inspection and replacement of carbon brushes, emphasizing safety and qualified personnel.
Covers essential maintenance tasks, including checking and changing the oil level.
Provides the necessary information required when ordering replacement parts for the unit.
