7. ¼ inch female thread
8. Universal clamp
9. Adjusting screw
10. ¼ inch male thread with wheel
Items supplied
Please check that the article is complete as specifi ed in the scope of delivery. If parts are missing, please contact
our service center or the store where you made your purchase at the latest within 5 workdays after purchasing the
article and upon presentation of a valid bill of purchase.
Open the packaging and take out the equipment with care.
Remove the packaging material and any packaging and/or transportation braces (if present).
Check to see if all the items are supplied.
Inspect the equipment and accessories for transport damage.
If possible, keep the packaging until the end of the guarantee period.
Danger!
The equipment and packaging material are not toys. Do not let children play with plastic bags, plastic sheets and
small parts. There is a risk of choking and suff ocating!
Cross-line laser
Mounting
Bag
Original operating instructions
Safety information
Intended use
The cross-line laser uses lasers to project lines onto the wall and is therefore designed for aligning objects such as
tiles, windows, doors, or pictures. The equipment is allowed to be used only for its prescribed purpose. Any other use
is deemed to be a case of misuse. The user/operator and not the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse. Please note that our equipment has not been designed for use in
commercial, trade, or industrial applications. Our warranty will be voided if the equipment is used in commercial,
trade, or industrial businesses or for equivalent purposes.
Technical data
Power supply: ………….. 2 x 1.5 V; type AA (LR06)
Self-leveling range: ………………………………….± 4°
Accuracy: …………. ± 3⁄16 -in. @ 30-ft (± 0.5 mm/m)
Work range: ………………………………….. 26 ft (8 m)
Wavelength of vertical laser: ………………. 635 nm
Wavelength of horizontal laser: ……………. 635 nm
Laser class: ………………………………………………. II
Output power: ………………………………….. < 1 mW
Weight: …………………………………0.44 lbs (0.2 kg)
This standard applies to equipment designed to be safe at least under the following conditions:
a) Indoor use
b) Altitude up to ~6500ft (2000m)
c) Temperatures 41°F – 104°F ( 5°C – 40°C)
d) Maximum relative humidity 80% for temperatures up to 88°F (31°C) decreasing linearly to 50% relative humidity at
104°F (40°C)
Before starting the equipment
Inserting batteries (Fig. 2)
Turn off the equipment using the ON/OFF switch (1)
Open the battery compartment cover (6) by pressing the nib (a) down.
To Next Page
Loading...
