these may be aggressive to the plastic parts in the equipment. Ensure that no water can get into
the interior of the equipment. The ingress of water into an electric power tool increases the risk of an electric
shock.
Maintenance
There are no other parts inside the equipment which require maintenance.
Ordering replacement parts:
Service
1. If your power tool requires service, contact an authorized Einhell USA dealer or call the Einhell USA customer
service center at 1-866-EINHELL (1-866-346-4355). Only identical replacement parts should be utilized for
repairs. This will ensure that the safety of the power tool is maintained.
2. If the battery charger cable is damaged, it must be immediately replaced to avoid a hazard. Contact the Einhell
USA ® customer the service center at 1-866-EINHELL
(1-866-346-4355) for assistance.
Disposal and recycling
The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this
packaging can be reused or recycled. The equipment and its accessories are made of various types of material,
such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be
taken to a suitable collection center for proper disposal. If you do not know the whereabouts of such a collection
point, you should ask in your local council offi ces.
Battery Caution + Disposal
Disposal
Should your appliance need replacement after extended use, do not dispose of it with the household
refuse, but in an environmentally safe way. Waste produced by electrical machine items should not be handled like
normal household rubbish. Please recycle where recycling facilities exist. Check with your local authority or retailer
for recycling advice. Always dispose of your battery pack according to federal, state, and local regulations. Contact a
recycling agency in your area for recycling locations.
CAUTION! Even discharged battery packs contain some energy. Before disposing of, use electrical tape to
cover the terminals to prevent the battery pack from shorting, which could cause a fi re or explosion.
WARNING! To reduce the risk of injury or explosion, never burn or incinerate a battery pack even if it is
damaged, dead, or completely discharged. When burned, toxic fumes and materials are emitted into the surrounding
atmosphere.
1. Batteries vary according to the device. Consult your manual for specifi c information.
2. Install only new batteries of the same type in your product (where applicable).
3. Failure to insert batteries in the correct polarity, as indicated in the battery compartment or manual may shorten
the life of the batteries or cause batteries to leak.
4. Do not mix old and new batteries.
5. Do not mix Alkaline, Standard (Carbon-Zinc), or Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or Lithium-
Ion) batteries.
6. Do not dispose of batteries in fi re.
7. Batteries should be recycled or disposed of as per state and local guidelines.
When shipping or disposing of batteries and cordless tools, always ensure that they are packed individually
in plastic bags to prevent short circuits and fi res.
Storage
To Next Page
Loading...
