To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-MG 220/1E and is the answer not in the manual?
General safety guidelines applicable to all electric tools, covering mains and battery-powered types.
Measures to ensure a safe working environment, including cleanliness, lighting, and avoiding hazardous areas.
Precautions to prevent electric shock, such as proper plugs, avoiding water, and using extension cables correctly.
Guidelines for personal safety, including staying attentive, wearing protective equipment, and preventing accidental starts.
Identification of the tool's components and parts with reference to a diagram.
List of accessories and parts included with the multifunction tool, and instructions for checking completeness.
Specifies the noise and vibration levels of the equipment according to standards like EN 60745.
Recommendations for minimizing exposure to noise and vibrations during tool operation.
Identifies potential hazards that may remain even with correct usage, such as lung damage or hearing loss.
Instructions on how to safely attach and secure interchangeable tools to the multifunction tool.
Guidance on attaching sanding paper and dust extraction for the triangular plate attachment.
How to turn the multifunction tool on and off using the switch.
Practical tips for using various plug-in tools like sawing, sanding, and scraping.
Tips for effective sanding and grinding, especially in hard-to-reach areas.
Guidance on using the tool for scraping tasks like removing paint or adhesives.
Explanation of how to adjust the tool's speed using the speed controller for different tasks.
Instructions for cleaning the tool to ensure proper function and longevity, emphasizing safety.
Information on checking and replacing carbon brushes, emphasizing professional servicing.
General guidelines for maintaining the tool for optimal performance and safety.
Information required for ordering spare parts from the manufacturer or service center.
General