To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-MG 350 EQ and is the answer not in the manual?
General| Power | 350 W |
|---|---|
| Oscillation Angle | 3° |
| Weight | 1.4 kg |
| Vibration Level | 2.5 m/s² |
| Sanding Paper Attachment | Hook and loop |
| Cable Length | 2 m |
| Protection Class | II |
| No-load Speed | 11, 000 - 14, 000 rpm |
| Oscillation Rate | 20, 000 - 40, 000 min-1 |
Details the physical components and numbered parts of the tool.
Lists all accessories and components included with the product.
Provides measured sound pressure and power levels, and vibration emission values.
Guides for fitting plug-in tools, sanding plates, and dust extraction adapters.
Instructions on how to power the multifunction tool on and off.
Advice for effective operation, including sawing, sanding, and scraping techniques.
Explanation of how to adjust the tool's speed using the speed controller.
Recommendations for cleaning the tool after use to maintain its condition.
Information regarding checking and replacing carbon brushes.
Note on internal components requiring no additional maintenance.
