EINHELL TC-MX 1400-2 E Original Operating Instructions

GB
- 13 -
Danger! - Read the operating instructions to reduce the risk of inquiry
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Change the gear only when the drill is at a standstill. If you fail to observe this point, the gearing may be
damaged.
Anl_TC_MX_1400_2_E_SPK9.indb 13Anl_TC_MX_1400_2_E_SPK9.indb 13 09.03.2021 06:55:4509.03.2021 06:55:45

EINHELL TC-MX 1400-2 E Specifications

General

Input power	1400 W
AC input voltage	220-240 V
AC input frequency	50 Hz
Idle speed	780 RPM
Torque (max)	- N⋅m
Maximum stirrer diameter	133 mm
Package depth	345 mm
Package width	675 mm
Package height	230 mm
Package weight	6070 kg
Best uses	Mortar, Paint
Chuck type	-
Soft start	Yes
Product color	Red
Spindle thread	M14
Number of speeds	2

Weight and Dimensions

Width	325 mm
Height	210 mm
Weight	3460 g