EasyManua.ls Logo

EINHELL TC-PG 25/E5 - Troubleshooting

EINHELL TC-PG 25/E5
168 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
- 22 -
10. Troubleshooting
Fault Mögliche Ursache Behebung
Engine does not
start
Automatic oil cut-out has not respon-
ded
Spark plug fouled
No fuel
Check oil level, top up engine oil
Clean or replace spark plug (electro-
de spacing 0.6 mm)
Refuel / have the petrol cock checked
Generator has too
little or no
voltage
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air lter dirty
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the lter
Anl_TC_PG_25_E5_SPK9.indb 22Anl_TC_PG_25_E5_SPK9.indb 22 13.06.2019 07:35:3913.06.2019 07:35:39

Table of Contents

Related product manuals