EINHELL TC-US 400 User Manual

GB
- 22 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts*
Consumables* Abrasive paper, grinding/sanding belt
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_US_400_SPK1.indb 22Anl_TC_US_400_SPK1.indb 22 02.06.14 08:0402.06.14 08:04

EINHELL TC-US 400 Specifications

General

Power	375 W
Type of sander	Belt sander
Idle speed (max)	1450 RPM
Power source	AC
AC input voltage	230 V
Package weight	18000 g

Weight and Dimensions

Depth	500 mm
Width	310 mm
Height	260 mm
Weight	15500 g
Sanding disc diameter	150 mm