GB
- 21 -
Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool. Failure to adhere to the
following instructions may result in electric shock,
fi re and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.
2. Layout and items supplied
2.1 Layout (Fig. 1/2a-2c)
1. ON/OFF switch
2. Safety window
3. Spark defl ector
4. Cover
5. Grinding wheel
6. Polishing Wheel
7. Workpiece support
8. Mounting holes
9. Base plate
10. Speed controller
11. Flexible shaft
12. Locking pin
13. Wrench
14. Recessed head screw
15. Nut
16. Lock bolt (long)
17. Washer (small)
18. Spring washer (small)
19. Locking button
20. Washer, large
21. Spring washer, large
22. Locking screw
23. Shaft mount
24. Union nut
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Double-Wheel Grinder
•
Safety window (2x)
•
Spark deflector (2x)
•
Workpiece support (2x)
•
Flexible shaft
•
Locking pin
•
Wrench
•
Recessed head screw (4x)
•
Nut (4x)
•
Lock bolt (long) (2x)
•
Washer (small) (2x)
•
Spring washer (small) (2x)
•
Locking button (2x)
•
Washer (large) (2x)
•
Spring washer (large) (2x)
•
Locking screw (2x)
•
Tools for the flexible shaft (see Chapter 7)
•
Original operating instructions
•
Safety information
Anl_TC-XG_75_Kit_SPK9.indb 21Anl_TC-XG_75_Kit_SPK9.indb 21 13.07.2020 13:05:4413.07.2020 13:05:44
To Next Page
Loading...
