EINHELL TE-AP 950 E User Manual

GB
- 6 -
h) Do not allow yourself to be lulled into a
false sense of security and do not ignore
the safety regulations covering electric
power tools, even if you are familiar with
the power tool after having used it many
times. Carelessness can lead to serious inju-
ries in just a fraction of a second.
4. Using and handling the power tool
a) Do not overload your power tool. Use the
correct electric tool for the job in hand.
The correct tool will enable you to work better
and more safely within the specifi c perfor-
mance range.
b) Do not use an electric power tool if the
switch is defective. An electric power tool
that cannot be switched on or off is dange-
rous and must be repaired.
c) Pull the plug out of the socket and/or
remove the removable battery pack be-
fore making any adjustments to the tool,
changing plug-in tool parts or putting the
power tool down. These precautions will
prevent the power tool starting accidentally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the power tool
or who have not read these instructions
to use the power tool. Electric tools are
dangerous if they are used by inexperienced
people.
e) Look after power tools and plug-in tools
with care. Check that moving parts
function correctly and do not jam, and
whether any parts are broken or dama-
ged such that they adversely aff ect the
function of the power tool. Have damaged
parts repaired before you use the power
tool. Many accidents are caused by poorly
maintained electric tools.
f) Keep cutting tools sharp and clean. Ca-
refully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Use the power tool, plug-in tools, etc.
as set out in these instructions. Take ac-
count of the conditions in your work area
and the job in hand. Using electric tools for
purposes other than the one for which they
are designed can result in dangerous situa-
tions.
h) Keep the handles and grip surfaces dry,
clean and free from oil and grease. If the
handles and grip surfaces are slippery, it will
not be possible to operate and control the
power tool safely in unforeseen situations.
5. Service
a) Have your power tool repaired only by
trained personnel using only genuine
spare parts. This will ensure that your power
tool remains safe to use.
SiHi_Universalsaege_SPK13.indb 6SiHi_Universalsaege_SPK13.indb 6 23.02.2021 15:09:4323.02.2021 15:09:43

EINHELL TE-AP 950 E Specifications

General

Product color	Black, Red
Input power	950 W
Power source	AC
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Stroke length	28 mm
Cutting depth in wood	200 mm
Cutting depth in steel	20 mm
Speed control type	Electronic

Weight and Dimensions

Width	95, 492 mm
Height	201 mm
Weight	3194 g