EINHELL TE-CD 18 Li User Manual

GB
- 6 -
Caution - Read the operating instructions to reduce the risk of injury
Wear ear-muff s. The impact of noise can cause damage to hearing.
Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the de-
vice can cause loss of sight.
Wear a breathing mask. Dust which is injurious to health can be generated when working on wood
and other materials. Never use the device to work on any materials containing asbestos!
Change the gear only when the drill is at a standstill. If you fail to observe this point, the gearing may be
damaged.
degrahc ylno ecalP .C°04+ ot C°01+ fo erutarepmet tneibma na htiw smoor yrd ni ylno yrettab eht erotS
batteries in storage (charged at least 40%).
Anl_TE_CD_18_Li_Kit_SPK7.indb 18 04.06.13 12:04

EINHELL TE-CD 18 Li Specifications

General

Soft grip	Yes
Product design	Pistol grip drill
Number of gears	2
Torque settings	24
Screw diameter (max)	10 mm
Idle speed (1st gear)	320 RPM
Idle speed (2nd gear)	1350 RPM
Maximum torque (hard applications)	48 N⋅m
Product color	Black, Red
Number of batteries included	1 pc(s)
Power source	Battery
Charging time	30 min
Battery voltage	18 V
Battery capacity	1.5 Ah

Weight and Dimensions

Depth	420 mm
Width	105 mm
Height	335 mm
Weight	1500 g