Need help?Do you have a question about the EINHELL TE-ID 750/1 E and is the answer not in the manual?
General| Power | 750 W |
|---|---|
| No-load speed | 0-3000 rpm |
| Impact rate | 0-48000 bpm |
| Chuck capacity | 1.5-13 mm |
| Drilling capacity in wood | 30 mm |
| Drilling capacity in metal | 10 mm |
| Drilling capacity in concrete | 13 mm |
| Chuck size | 13 mm |
| Cable length | 2 m |
| Drill capacity (steel) | 10 mm |
| Drill capacity (masonry) | 13 mm |
To Next Page
