EINHELL TE-JS 100 User Manual

GB
- 25 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes, Guide roller, Splinter guard
Consumables* Saw blade
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anleitung_TE_JS_100_SPK9.indb 25Anleitung_TE_JS_100_SPK9.indb 25 17.05.2017 11:45:1317.05.2017 11:45:13

EINHELL TE-JS 100 Specifications

General

Stroke height	23 mm
No-load stroke rate	3000 spm
Input power	- W
Output power	750 W
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz
Cutting depth in wood	100 mm
Cutting depth in non-alloyed steel	10 mm
Soft grip	Yes
Product color	Black, Red
Bevel capacity (max)	45 °

Weight and Dimensions

Depth	415 mm
Height	310 mm
Weight	2300 g