EINHELL TH-US 240 User Manual

TH-US 240
Art.-Nr.: 44.661.50 I.-Nr.: 11013
9
D Originalbetriebsanleitung
Stand-Bandschleifer
GB Original operating instructions
Bench belt sander
F Instructions d’origine
Ponceuse a bande
I Istruzioni per l’uso originali
Levigatrice a nastro
DK/ Original betjeningsvejledning
N Båndsliber-bordmodel
S Original-bruksanvisning
Bänkbandslip
CZ Originální návod k obsluze
Stojanová pásová bruska
SK Originálny návod na obsluhu
Stojanová pásová bruska
NL Originele handleiding
Staande bandschuurmachine
E Manual de instrucciones original
Lijadora de banda fi ja
FIN Alkuperäiskäyttöohje
Pystynauhahiomakone
SLO Originalna navodila za uporabo
Stoječi tračni brusilnik
H Eredeti használati utasítás
Állványos szalagcsiszoló
GR Πρωτότυπες Οδηγίες χρήσης
Tροχιστική συσκεή κορδέλλς με
βάση
Anl_TH_US_240_SPK9.indb 1Anl_TH_US_240_SPK9.indb 1 19.09.2018 08:39:1119.09.2018 08:39:11

EINHELL TH-US 240 Specifications

General

Power	240 W
Grain size grinding wheel	K36
Grain size sanding belt	K80
Grinding wheel	150 mm
Sanding belt	686 x 50 mm

Summary

Safety Regulations

Layout and Items Supplied

Proper Use

Technical Data

Sound and Vibration Safety

Wear Ear-muffs

Warning to wear ear protection due to noise impact.

Noise and Vibration Minimization

Before Starting Equipment

Assembly of Spark Deflector

Fitting Workpiece Supports

Changing Grinding Wheel

Procedure for safely replacing the grinding wheel.

Changing Grinding/Sanding Belt

Guide for replacing the grinding or sanding belt.

Operation

Grinding Process

Grinding/Sanding with Belt

Warranty Provisions