EisSound KBSound iSelect - 6. Selecting Turn-On Mode

14
If the Turn-On mode is set to
“on” in this state, when
power is fed to the unit, it will
turn on in “ideal” mode (see
Chapter 3).
If the Turn-On mode is set to “off”,
when power is fed to the unit, it will
turn on in “off” mode.
This function is designed for use in the event that the
power supply is fed by a specifically designated switch. In this
case, the automatic activation mode must be programmed in order to
automatically turn on unit when the switch is activated.
These steps must be followed:
KB
KB
SOUND
SOUND
®
®
iSelect
or SPACE
iSelect
1. Supply power to the unit by
turning on the switch. The unit
will flicker a couple of times and turn off.
2. Turn on the unit using the
remote control (ON/OFF key).
3. With the unit turned on, keep
the ON/OFF key pressed down for 2 seconds.
KB
KB
KB
KB
SOUND / Space
SOUND
SOUND
SOUND
®
®
®
®
iSelect
iSelect / Space
iSelect / Space
iSelect / Space
Key Sequence Display
6. Selecting Turn-On Mode
AUTO x
2’’
2’’
CC-1194ENG-01