Eizo COLOR EDGE CG241W User Manual

42 pages

To Next Page

About TCO'03 ............................................................ 39

FCC Declaration of Conformity .................................. 40

Hinweise zur Auswahl des richtigen

Schwenkarms für Ihren Monitor /

Hinweis zur Ergonomie .............................................. 41

SAFETY SYMBOLS .................................................... 2

PRECAUTIONS ...................................................... 3

1. Introduction .............................................................. 7

1-1. Features .............................................................. 7

1-2. Buttons and Indicators ........................................ 8

1-3. Utility Disk ........................................................... 9

2. Installation .............................................................. 10

2-1. Connecting Two PCs to the Monitor .................. 10

2-2. Making Use of USB (Universal Serial Bus) .

.........12

3. Screen Adjustment and Settings ........................... 13

3-1. Basic Operation and Functions ......................... 13

3-2. Screen Adjustment ............................................15

3-3. Color Adjustment ............................................... 18

3-4. Power-save Setup ............................................. 21

3-5. Off Timer ........................................................... 22

3-6. Locking the settings........................................... 22

3-7. Power Indicator Setting ..................................... 23

3-8. Automatic brightness adjustment ......................23

3-9. Displaying Lower Resolutions ........................... 24

3-10.

Setting the orientation of the Adjustment menu

...... 25

3-11. EIZO Logo Appearing Function ....................... 25

4.Troubleshooting ...................................................... 26

5. Reference .............................................................. 29

5-1. Attaching an arm ............................................... 29

5-2.

Environmental Settings (Digital signals only)

.....30

5-3. Cleaning ............................................................ 31

5-4. Speciﬁcations .................................................... 32

5-5. Glossary ............................................................ 35

6. APPENDIX/ANHANG/ANNEXE ............................ 37

How to Setup

Please read the Setup Manual (separate volume)

The latest User's Manual is

available for download from our site:

http://www.eizo.com

Important

Please read PRECAUTIONS, this User’s

Manual and Setup Manual (separate

volume) carefully to familiarize yourself

with safe and effective usage.

Questions and Answers:

S
seanowensSep 5, 2025
What does it mean if the message shows that the input signal is out of the specified frequency range on my Eizo Monitor?
- C
  Courtney WallsSep 5, 2025
  If the message shows that the input signal is out of the specified frequency range on your Eizo monitor, reboot the PC and select an appropriate display mode using the graphics board’s utility.
D
Debbie PopeSep 7, 2025
Why is the upper part of the screen distorted on my Eizo COLOR EDGE CG241W?
- S
  Shelly RodriguezSep 7, 2025
  The upper part of the screen is distorted on your Eizo monitor when both composite sync (X-OR) signal and separate vertical sync signal are input simultaneously. Select either composite signal or separate signal.
T
Tiffany DavilaSep 8, 2025
Why do green/red/blue/white dots or defective dots remain on the screen of my Eizo Monitor?
- P
  paynekathySep 8, 2025
  The presence of green, red, blue, or white dots or defective dots on your Eizo monitor screen is due to LCD panel characteristics and is not a failure.
T
Tara ReevesSep 10, 2025
How to eliminate noise on the screen of my Eizo COLOR EDGE CG241W?
- R
  richard71Sep 10, 2025
  If noise appears on the screen of your Eizo monitor when entering analog input signals, select 1 to 4 in from the menu to change the mode.