EasyManua.ls Logo

Eizo FlexScan S2242W - User Manual

Eizo FlexScan S2242W
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FEATURES
22" Color LCD Monitor
S
mall enough to fit in a tight workspace,
but big enough to display multiple
applications at once inne detail,
the FlexScan S2242W shows 24.1" of
data on a 22" screen. The monitors
many EcoView features improve visual
ergonomics, while reducing power
consumption and energy expenses.
•1920×1200nativeresolution
•350cd/m
2
brightness
•Widecolorgamut
•5-yearwarranty
Compact, High Resolution Screen
The FlexScan S2242W features a 16:10 aspect ratio
with a 1920 × 1200 native resolution. Thanks to
its 0.247 mm pixel pitch and display of 103 pixels
per inch, it shows 30% more information than a
typical 22" monitor with a 1680 × 1050 resolution.
The FlexScan S2242W displays the same amount of
information as a typical 24.1" monitor, but occupies
10% less desk space. This is ideal for offices or
trading floors where a 24.1" monitor is desired, but
cannot be installed due to space constraints.
Optimized Brightness with Auto EcoView
A built-in sensor measures ambient light and optimizes
the screens brightness, so the monitor is never too
bright or too dark. This results in improved visual
ergonomics and reduced power consumption by up to
52% compared to when Auto EcoView is turned off.
Power Savings with EcoView Index
A user-activated on-screen index shows the level
of power savings in correlation with the monitor’s
brightness to encourage environmental consciousness
while working.
Centralized Power Management
For businesses using multiple monitors, EIZO’s
EcoView NET power management software helps
reduce electricity consumption, providing long-term
energy savings and a smaller carbon footprint. The
software offers centralized control over network
monitors’ power settings, including brightness
adjustment and turning the monitors’ power and
Auto EcoView on or off. EcoView NET features
server and client software and is compatible with
Windows XP, Vista, and Server 2003 and 2008.
511 mm 566 mm
24.1"
22"
Typical 24.1" monitor S2242W
TheFlexScanS2242Woccupies10%lessdeskspacethan
a typical 24.1" monitor, but displays the same amount of
information.

Questions and Answers

  • K
    Kelly LeachAug 19, 2025
    How to adjust brightness on Eizo FlexScan S2242W if the screen is too bright or dark?
    • H
      Holly CrawfordAug 19, 2025
      If your Eizo monitor screen is too bright or too dark, adjust the brightness or contrast settings. You can also turn on the Auto EcoView function.
  • R
    Rhonda StricklandAug 21, 2025
    Why is my Eizo FlexScan S2242W, connected with the USB cable, not detected?
    • W
      williamsphillipAug 21, 2025
      If your Eizo monitor connected with a USB cable is not detected, verify that the USB cable is correctly connected. Try changing the USB port to another one and reboot your PC. Also, check whether the PC and OS are USB compliant, and review the PC’s BIOS setting for USB when using Windows.
  • B
    Brenda MarquezAug 25, 2025
    How to fix no picture on my Eizo FlexScan S2242W when the power indicator does not light up?
    • D
      Dylan GriffinAug 25, 2025
      If your Eizo monitor shows no picture and the power indicator is off, verify that the power cord is correctly connected. If the issue persists, turn off the main power and then turn it on again after a few minutes. Also, ensure the main power switch is turned on and that you have pressed the power button.
  • A
    Andrea KennedyAug 26, 2025
    What to do if the power indicator light is orange on my Eizo Monitor?
    • E
      Elizabeth CastroAug 26, 2025
      If your Eizo monitor's power indicator is orange, try switching the input signal using the appropriate button. Also, ensure that your PC is turned on and try operating the mouse or keyboard to see if the monitor responds.
  • R
    Richard MorenoAug 28, 2025
    What to do if a message appears on my Eizo Monitor?
    • P
      pattersonfrankAug 28, 2025
      If your Eizo monitor displays a message, first, ensure that your PC is turned on. Next, check that the signal cable is properly connected. Try switching the input signal. If you are using a long DVI cable, adjust the DVI input level using the [DVI Input Level] setting.
  • B
    bettywardAug 30, 2025
    Why does noise appear on the screen of my Eizo FlexScan S2242W Monitor?
    • J
      Jennifer RothAug 30, 2025
      If noise appears on your Eizo monitor screen, and you are using analog input signals, change the setting to “On” in from the menu. If you are using HDCP system signals, note that normal images may not be displayed immediately. If you're using a long DVI cable, adjust the DVI input level using [DVI Input Level].
  • J
    Jennifer RossSep 1, 2025
    How to fix blurred characters on my Eizo Monitor?
    • Z
      Zachary GreenSep 1, 2025
      If characters are blurred on your Eizo monitor, check whether the signal setting of your PC matches the resolution and the vertical frequency settings for the monitor. You may also need to adjust using the [Smoothing] setting.
  • O
    ogarciaSep 3, 2025
    What causes afterimages to appear on my Eizo FlexScan S2242W?
    • N
      nmurphySep 3, 2025
      If you are experiencing afterimages on your Eizo monitor, use a screen saver or off timer function for long-time image displays. Also, avoid displaying the same image for extended periods.
  • T
    Tara WagnerSep 5, 2025
    How to correct the display position on my Eizo Monitor?
    • M
      Mr. Ronald LarsonSep 5, 2025
      If the display position on your Eizo monitor is incorrect, adjust the image position so that it is displayed properly within the display area using the [Position] setting. If the issue continues, use the graphics board’s utility, if available, to change the display position.
  • M
    Mark TrevinoSep 7, 2025
    How to stop the whole screen from flickering or blurring on my Eizo FlexScan S2242W Monitor?
    • K
      Kurt MosleySep 7, 2025
      If the whole screen of your Eizo monitor is flickering or blurring, adjust using the [Phase] setting.

Eizo FlexScan S2242W Specifications

General IconGeneral
Screen Size22 inches
Resolution1680 x 1050
Brightness300 cd/m²
Contrast Ratio1000:1
ConnectivityDVI-D, D-Sub
Aspect Ratio16:10
Panel TypeIPS
Viewing Angles178° horizontal, 178° vertical

Related product manuals