Eizo FlexScan S2133

Other manuals for Eizo FlexScan S2133

Questions and Answers:

M
Maria MillerAug 22, 2025
How to adjust brightness on my Eizo FlexScan S2133 Monitor if the screen is too bright or dark?
- D
  Debra JacksonAug 22, 2025
  If your Eizo monitor's screen is too bright or too dark, you can adjust it using the following methods: * Use the "Brightness" or "Contrast" settings in the Setting menu to manually adjust the screen brightness. * If the screen is too bright, enable the Auto EcoView feature. This will allow the monitor to automatically adjust the screen brightness based on the environmental brightness it detects.
J
Jesus HoffmanAug 25, 2025
Why are my USB devices not working when connected to my Eizo FlexScan S2133?
- K
  Kimberly JacobsAug 25, 2025
  If USB devices connected to your Eizo monitor aren't working, consider these solutions: * Ensure the USB cable is correctly connected. * Try a different USB port on your computer. * Reboot your PC. * Check if your PC and operating system are USB compliant. * Verify the PC’s BIOS settings for USB (if using Windows). * If the peripheral devices work correctly when the PC and peripheral devices are connected directly, please contact your local EIZO representative.
J
Janet BrandtAug 26, 2025
What to do if my Eizo FlexScan S2133 says the input signal is out of range?
- M
  Marissa FloresAug 26, 2025
  If your Eizo monitor displays a message indicating that the input signal is out of the specified frequency range, here's what you can do: * Check that your PC's resolution and vertical scan frequency meet the monitor's requirements. * Reboot your PC. * Use your graphics board's utility to select an appropriate setting. Refer to the graphics board's user manual for details.
A
alexanderleeAug 28, 2025
Why are the characters blurred on my Eizo FlexScan S2133 Monitor?
- A
  amanda81Aug 28, 2025
  If the characters on your Eizo monitor appear blurred, here are a couple of things to check: * Verify that your PC's resolution and vertical scan frequency are compatible with the monitor's specifications. * If you're using a resolution other than the recommended one, characters or lines may appear blurred. Try using the “Smoothing” and “Screen Size” options in the Setting menu to improve the display.
J
juan66Aug 29, 2025
How to correct the display position on my Eizo FlexScan S2133 Monitor?
- L
  Laura HernandezAug 30, 2025
  To correct an incorrect display position on your Eizo monitor: * Use the “Position” setting in the Setting menu to adjust the image position. * If the problem persists, use the graphics board’s utility (if available) to change the display position.
T
Thomas SmithAug 31, 2025
Why does noise appear on the screen of my Eizo FlexScan S2133 Monitor?
- C
  Christine BaileyAug 31, 2025
  If noise appears on your Eizo monitor's screen, try these solutions: * In the Setting menu, set “Overdrive” to “Off”. * Note that when entering HDCP signals, normal images may not be displayed immediately.
S
Stephanie KingSep 2, 2025
Why do afterimages appear on my Eizo FlexScan S2133 Monitor?
- R
  Ryan AtkinsonSep 3, 2025
  Afterimages are a common characteristic of LCD monitors. To minimize afterimages on your Eizo monitor: * Avoid displaying the same image for extended periods. * Use a screen saver or the power save function to prevent static images from being displayed for too long.
T
Timothy SmithSep 4, 2025
Why does my Eizo FlexScan S2133 switch to single monitor configuration when using DisplayPort?
- K
  kim08Sep 4, 2025
  If your Eizo monitor configuration changes to a single monitor setup when using DisplayPort, especially in a multi-monitor configuration: * Enable the “DP HotPlug” function. To do this, turn off the monitor, then hold down the button while pressing the power button to turn it back on. Repeating this process toggles the function on or off. Note that enabling this function may increase power consumption.
N
Nicholas AbbottSep 6, 2025
How to fix vertical bars or flickering on my Eizo FlexScan S2133?
- R
  Renee ReidSep 6, 2025
  If you see vertical bars on the screen or experience image flickering on your Eizo monitor, use the “Clock” setting in the Setting menu to adjust and correct the display.
A
Amy RandallSep 8, 2025
How to fix whole screen flickering or blurring on my Eizo Monitor?
- T
  Tina LarsonSep 8, 2025
  If the entire screen of your Eizo monitor is flickering or blurring, use the “Phase” setting in the Setting menu to adjust and resolve the issue.

Eizo FlexScan S2133 Specifications

General

3D	Yes
HD type	UXGA
Pixel pitch	0.270 x 0.270 mm
Aspect ratio	4:3
Screen shape	Flat
Response time	20 ms
Display diagonal	21.3 \
Display resolution	1600 x 1200 pixels
Display technology	LED
Contrast ratio (typical)	1500:1
Display number of colors	16.78 million colors
Viewable size, horizontal	540 mm
Digital vertical frequency	49 - 76 Hz
Digital horizontal frequency	24 - 80 kHz
Display brightness (typical)	420 cd/m²
Supported graphics resolutions	720 x 400, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Quantity	1
HDMI ports quantity	0
USB upstream port type	USB Type-B
USB Type-A downstream ports quantity	2
Pivot angle	0 - 90 °
Tilt angle range	- °
Number of OSD languages	6
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	DEU, ENG, ESP, FRE, ITA, SWE
Thin client installed	-
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	45 W
Power consumption (off)	0.1 W
Power consumption (standby)	0.3 W
Power consumption (typical)	17.4 W
Certification	CE, TÜV GS, TÜV, ISO 9241-307, TCO 6.0
Product color	Black
Cables included	DVI, USB
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	209 mm
Height (with stand)	535 mm
Weight (with stand)	8600 g
Depth (without stand)	64 mm
Width (without stand)	465 mm
Height (without stand)	361 mm
Weight (without stand)	5600 g

Summary

Location of Caution Statement

Notice for this monitor

Cleaning

To use the monitor comfortably

Chapter 1 Introduction

1-1. Features

Key features and capabilities of the EIZO FlexScan S2133 monitor.

1-2. Controls and Functions

1-3. EIZO LCD Utility Disk

1-4. Basic Operations and Functions

Chapter 2 Adjusting Screens

2-1. Compatible Resolutions

Lists supported resolutions for Analog, DVI-D, and DisplayPort inputs.

2-2. Setting the Resolution

Step-by-step guide to changing screen resolution on Windows and Mac OS.

2-3. Adjusting Color

How to select display modes (FineContrast) for optimal application use.

2-4. Screen Adjustment

Adjusting screen position, size, and eliminating flickering for analog inputs.

2-5. Screen Size Changing

How to change screen aspect ratio and adjust border brightness for non-display areas.

Chapter 3 Setting Monitor

3-1. Enabling Disabling DDCCI communication

Instructions for enabling or disabling DDC/CI for monitor control.

3-2. Locking Operation Buttons

How to lock monitor buttons to prevent accidental changes to settings.

3-3. Setting Orientation

How to change the Setting menu orientation for portrait display mode.

3-4. Showing and hiding the EIZO logo

Procedure to show or hide the EIZO logo displayed on startup.

3-5. Changing Setting Menu Display Position

How to adjust the position of the on-screen display menu.

3-6. Setting Language

How to select the display language for the monitor's menu and messages.

3-7. Resetting the Monitor to the Default Settings

Instructions for resetting monitor settings to factory defaults.

Chapter 4 Power Saving Functions

4-1. Setting Power Saving

How to configure the monitor's power saving modes based on PC status.

4-2. Setting Power Indicator

How to turn the monitor's power indicator light ON or OFF.

4-3. Enabling Disabling Automatic Brightness Adjustment

Guides on using Auto EcoView and EcoView Optimizer 2 for brightness control.

4-4. Checking the power saving level

How to view power reduction, CO2 reduction, and eco performance indicators.

4-5. Enabling Disabling Auto Power-OFF

How to set an automatic timer for the monitor to turn off.

Chapter 5 Troubleshooting

5-1. No picture

Troubleshooting steps for issues where the monitor displays no image or has power indicator problems.

5-2. Imaging problems (for both digital and analog)

Solutions for common display issues like brightness, blur, afterimages, and noise.

5-3. Imaging problems (for digital only)

Specific troubleshooting for digital signal issues, like multi-monitor configuration changes.

5-4. Imaging problems (for analog only)

Troubleshooting for analog signal issues like incorrect position or flickering.

5-5. Other problems

Addresses issues like the inability to select menu options or USB device malfunction.

Chapter 6 Reference

6-1. Attaching the Optional Arm

Instructions and precautions for attaching an optional monitor arm or stand.

6-2. Connecting Multiple PCs

Information on connecting to multiple computers and switching input signals.

6-3. Making Use of USB (Universal Serial Bus)

Details on using the monitor's USB hub functionality and required system environment.

6-4. Displaying Monitor Information

How to access and view monitor details like model name, serial number, and usage time.

6-5. Specifications

Technical specifications of the monitor, including panel, dimensions, power, and connectivity.

6-6. Preset Timing

Table of factory preset analog signal timing parameters for different resolutions.

Chapter 7 Glossary

Appendix

LIMITED WARRANTY

Recycling Information

China Measures for RoHS Compliance in ChinaRoHS

Related product manuals