Eizo FlexScan S2133 - User Manual

Other manuals for Eizo FlexScan S2133

Setup Guide2 pages

Questions and Answers

S
Sara DavisSep 10, 2025
Why doesn't the auto adjustment function work on my Eizo Monitor?
- T
  Thomas HopkinsSep 10, 2025
  The auto adjustment function on your Eizo monitor may not work due to the following reasons: * It does not work during digital signal input. * It is designed for use on Macintosh and AT-compatible PCs running Windows and may not function correctly if an image is displayed only on part of the screen or with a black background. * It may not work correctly with some graphics boards.
E
Elizabeth JohnsonSep 12, 2025
Why doesn't the Setting menu appear on my Eizo FlexScan S2133?
- M
  Margaret HarrisonSep 12, 2025
  If the Setting menu is not appearing on your Eizo monitor, check if the operation lock function is active.
J
Jeremy ChungSep 14, 2025
What to do if interference patterns or pressure marks remain on the screen of my Eizo FlexScan S2133 Monitor?
- A
  Annette HernandezSep 14, 2025
  If you notice interference patterns or pressure marks on your Eizo monitor's screen, leave the monitor displaying a white or black screen. This may help the symptom disappear over time.
K
Kevin AdkinsSep 15, 2025
Why can't I select “Smoothing” in the Setting menu on my Eizo FlexScan S2133?
- E
  Eric BuckSep 15, 2025
  You cannot select “Smoothing” when the screen is displayed in the following resolutions or settings: * The resolution is 1600 × 1200 * The resolution is 800 × 600 * Screen Size is “Normal”
J
Jennifer WebbSep 18, 2025
Why are there green, red, blue, or white dots on my Eizo FlexScan S2133 screen?
- D
  Dawn BauerSep 18, 2025
  This is due to LCD panel characteristics and is not a failure.
Q
qmartinNov 19, 2025
What to do if my Eizo FlexScan S2133 Monitor has no picture and the power indicator is off?
- B
  Brittany YoderNov 19, 2025
  If your Eizo monitor isn't displaying a picture and the power indicator is off, try these steps: * Ensure the power cord is properly connected. * Turn the monitor off, wait a few minutes, and then turn it back on. * Verify that the PC is turned on. * Move the mouse or press a key on the keyboard. * Increase the Brightness, Contrast, or Gain in the Setting menu. * Switch the input signal. * If the screen remains black, turn the monitor off and on using its power button. Then, press and hold the button while pressing the power button to turn on the monitor. Reboot the PC. Repeat these steps to return to the previous setting. * If you're using a DisplayPort connection, the connected device may have a problem. Resolve the issue, turn off the monitor, and then turn it back on...

Summary

Location of Caution Statement

Notice for this monitor

Cleaning

To use the monitor comfortably

Chapter 1 Introduction

1-1. Features

Key features and capabilities of the EIZO FlexScan S2133 monitor.

1-2. Controls and Functions

1-3. EIZO LCD Utility Disk

1-4. Basic Operations and Functions

Chapter 2 Adjusting Screens

2-1. Compatible Resolutions

Lists supported resolutions for Analog, DVI-D, and DisplayPort inputs.

2-2. Setting the Resolution

Step-by-step guide to changing screen resolution on Windows and Mac OS.

2-3. Adjusting Color

How to select display modes (FineContrast) for optimal application use.

2-4. Screen Adjustment

Adjusting screen position, size, and eliminating flickering for analog inputs.

2-5. Screen Size Changing

How to change screen aspect ratio and adjust border brightness for non-display areas.

Chapter 3 Setting Monitor

3-1. Enabling; Disabling DDC;CI communication

Instructions for enabling or disabling DDC/CI for monitor control.

3-2. Locking Operation Buttons

How to lock monitor buttons to prevent accidental changes to settings.

3-3. Setting Orientation

How to change the Setting menu orientation for portrait display mode.

3-4. Showing and hiding the EIZO logo

Procedure to show or hide the EIZO logo displayed on startup.

3-5. Changing Setting Menu Display Position

How to adjust the position of the on-screen display menu.

3-6. Setting Language

How to select the display language for the monitor's menu and messages.

3-7. Resetting the Monitor to the Default Settings

Instructions for resetting monitor settings to factory defaults.

Chapter 4 Power Saving Functions

4-1. Setting Power Saving

How to configure the monitor's power saving modes based on PC status.

4-2. Setting Power Indicator

How to turn the monitor's power indicator light ON or OFF.

4-3. Enabling; Disabling Automatic Brightness Adjustment

Guides on using Auto EcoView and EcoView Optimizer 2 for brightness control.

4-4. Checking the power saving level

How to view power reduction, CO2 reduction, and eco performance indicators.

4-5. Enabling; Disabling Auto Power-OFF

How to set an automatic timer for the monitor to turn off.

Chapter 5 Troubleshooting

5-1. No picture

Troubleshooting steps for issues where the monitor displays no image or has power indicator problems.

5-2. Imaging problems (for both digital and analog)

Solutions for common display issues like brightness, blur, afterimages, and noise.

5-3. Imaging problems (for digital only)

Specific troubleshooting for digital signal issues, like multi-monitor configuration changes.

5-4. Imaging problems (for analog only)

Troubleshooting for analog signal issues like incorrect position or flickering.

5-5. Other problems

Addresses issues like the inability to select menu options or USB device malfunction.

Chapter 6 Reference

6-1. Attaching the Optional Arm

Instructions and precautions for attaching an optional monitor arm or stand.

6-2. Connecting Multiple PCs

Information on connecting to multiple computers and switching input signals.

6-3. Making Use of USB (Universal Serial Bus)

Details on using the monitor's USB hub functionality and required system environment.

6-4. Displaying Monitor Information

How to access and view monitor details like model name, serial number, and usage time.

6-5. Specifications

Technical specifications of the monitor, including panel, dimensions, power, and connectivity.

6-6. Preset Timing

Table of factory preset analog signal timing parameters for different resolutions.

Chapter 7 Glossary

Appendix

LIMITED WARRANTY

Recycling Information

China Measures for RoHS Compliance in ChinaRoHS

Eizo FlexScan S2133 Specifications

General

3D	Yes
HD type	UXGA
Pixel pitch	0.270 x 0.270 mm
Aspect ratio	4:3
Screen shape	Flat
Response time	20 ms
Display diagonal	21.3 \
Display resolution	1600 x 1200 pixels
Display technology	LED
Contrast ratio (typical)	1500:1
Display number of colors	16.78 million colors
Viewable size, horizontal	540 mm
Digital vertical frequency	49 - 76 Hz
Digital horizontal frequency	24 - 80 kHz
Display brightness (typical)	420 cd/m²
Supported graphics resolutions	720 x 400, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Quantity	1
HDMI ports quantity	0
USB upstream port type	USB Type-B
USB Type-A downstream ports quantity	2
Pivot angle	0 - 90 °
Tilt angle range	- °
Number of OSD languages	6
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	DEU, ENG, ESP, FRE, ITA, SWE
Thin client installed	-
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	45 W
Power consumption (off)	0.1 W
Power consumption (standby)	0.3 W
Power consumption (typical)	17.4 W
Certification	CE, TÜV GS, TÜV, ISO 9241-307, TCO 6.0
Product color	Black
Cables included	DVI, USB
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	209 mm
Height (with stand)	535 mm
Weight (with stand)	8600 g
Depth (without stand)	64 mm
Width (without stand)	465 mm
Height (without stand)	361 mm
Weight (without stand)	5600 g