Eizo FlexScan S2133 User Manual

17
Chapter2AdjustingScreens
●
To adjust gamma
Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the
variation rate is not proportional to the input signal. To keep the balance between the input signal and the
brightness of the monitor is called as “Gamma correction”.
Adjustable range
1.8, 2.0, 2.2
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Gamma” in the “Color” menu, and press
.
The “Gamma” menu appears.
3. Use or for adjustment.
4. Press
to exit.
Note
• If “Paper” is selected in the FineContrast mode, the gamma value is displayed for “Paper”. The setting “Paper” is
specially meant to get the displayed image look like it is printed on paper.
●
To adjust the color saturation
This function allows you to adjust color saturation.
Adjustable range
-50 to 50
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Advanced Settings” in the “Color” menu, and press
.
3. Choose “Saturation” in the “Advanced Settings” menu, and press
.
The “Saturation” menu appears.
4. Use or for adjustment.
5. Press
to exit.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The minimum value (-50) changes the screen to monochrome.

Eizo FlexScan S2133 Specifications

General

3D	Yes
HD type	UXGA
Pixel pitch	0.270 x 0.270 mm
Aspect ratio	4:3
Screen shape	Flat
Response time	20 ms
Display diagonal	21.3 \
Display resolution	1600 x 1200 pixels
Display technology	LED
Contrast ratio (typical)	1500:1
Display number of colors	16.78 million colors
Viewable size, horizontal	540 mm
Digital vertical frequency	49 - 76 Hz
Digital horizontal frequency	24 - 80 kHz
Display brightness (typical)	420 cd/m²
Supported graphics resolutions	720 x 400, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Quantity	1
HDMI ports quantity	0
USB upstream port type	USB Type-B
USB Type-A downstream ports quantity	2
Pivot angle	0 - 90 °
Tilt angle range	- °
Number of OSD languages	6
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	DEU, ENG, ESP, FRE, ITA, SWE
Thin client installed	-
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	45 W
Power consumption (off)	0.1 W
Power consumption (standby)	0.3 W
Power consumption (typical)	17.4 W
Certification	CE, TÜV GS, TÜV, ISO 9241-307, TCO 6.0
Product color	Black
Cables included	DVI, USB
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	209 mm
Height (with stand)	535 mm
Weight (with stand)	8600 g
Depth (without stand)	64 mm
Width (without stand)	465 mm
Height (without stand)	361 mm
Weight (without stand)	5600 g