EasyManuals Logo

Eizo FlexScan S2133 User Manual

Eizo FlexScan S2133
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Chapter1Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
Supports a resolution of 1600 × 1200
IPS panel with 89˚ horizontal and vertical viewing angles
Applicable to DisplayPort (applicable to 8 bit)
The FineContrast function allows the user to select the display mode optimum to the displayed image.
- The Paper mode reproduces a printed paper effect on the monitor.
See To select the display mode (FineContrast Mode)” (page 14).
The software “ScreenManager Pro for LCD (DDC/CI)” to adjust the screen using the mouse and keyboard is
included.
See “1-3. EIZO LCD Utility Disk” (page 9).
- EyeCare Filter
Texture of the paper is reproduced by displaying a translucent image in the foreground of the desktop.
By using this function with the Paper mode, the screen looks more like paper.
See To select the display mode (FineContrast Mode)” (page 14).
Supports the power management software “EIZO EcoView NET”
For more information, refer to our web site (http://www.eizo.com).
Power saving function
Suppressing the power consumption
*1
reduces the carbon dioxide emissions. This product is equipped with power saving
function.
- Auto EcoView
The ambient light sensor on the front side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably. Excessively high brightness may increase power consumption and cause
unwanted environmental effects. It may also lead to fatigue of your eyes. Use the Auto EcoView to reduce the
brightness.
See Auto EcoView” (page 29).
- EcoView Optimizer 2
The monitor automatically adjusts the screen brightness according to the white level of the input signal. This
function can reduce the power consumption while maintaining the brightness specied by the input signal.
See EcoView Optimizer 2” (page 29).
*1 Reference values:
Maximum power consumption: 45 W (Brightness Max., when a USB device is connected, at default settings)
Standard power consumption: 12 W (100VAC, Brightness 120 cd/m
2
, when no USB device is connected, at default
settings)
Standard power consumption: 13 W (200VAC, Brightness 120 cd/m
2
, when no USB device is connected, at default
settings)
Supports portrait and landscape formats
Displays HDCP (High-bandwidth Digital Protection) protected contents.
Note
This monitor supports the portrait display. This function allows you to change the orientation of the Setting menu when
using the monitor screen in vertical display position (see 3-3. Setting Orientation” (page 26)).
When using the monitor screen in a portrait position, the graphics board supporting portrait display is required. When
placing the monitor in a portrait position, the settings of your graphics board need to be changed. Refer to the User’s
Manual of the graphics board for details.

Table of Contents

Other manuals for Eizo FlexScan S2133

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Eizo FlexScan S2133 and is the answer not in the manual?

Eizo FlexScan S2133 Specifications

General IconGeneral
3DYes
HD typeUXGA
Pixel pitch0.270 x 0.270 mm
Aspect ratio4:3
Screen shapeFlat
Response time20 ms
Display diagonal21.3 \
Display resolution1600 x 1200 pixels
Display technologyLED
Contrast ratio (typical)1500:1
Display number of colors16.78 million colors
Viewable size, horizontal540 mm
Digital vertical frequency49 - 76 Hz
Digital horizontal frequency24 - 80 kHz
Display brightness (typical)420 cd/m²
Supported graphics resolutions720 x 400, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Quantity1
HDMI ports quantity0
USB upstream port typeUSB Type-B
USB Type-A downstream ports quantity2
Pivot angle0 - 90 °
Tilt angle range- °
Number of OSD languages6
Panel mounting interface100 x 100 mm
On Screen Display (OSD) languagesDEU, ENG, ESP, FRE, ITA, SWE
Thin client installed-
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Energy efficiency scaleA to G
Power consumption (max)45 W
Power consumption (off)0.1 W
Power consumption (standby)0.3 W
Power consumption (typical)17.4 W
CertificationCE, TÜV GS, TÜV, ISO 9241-307, TCO 6.0
Product colorBlack
Cables includedDVI, USB
Sustainability certificatesENERGY STAR
Harmonized System (HS) code85285210
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)209 mm
Height (with stand)535 mm
Weight (with stand)8600 g
Depth (without stand)64 mm
Width (without stand)465 mm
Height (without stand)361 mm
Weight (without stand)5600 g

Related product manuals