Eizo FlexScan S2133 User Manual

16
Chapter2AdjustingScreens
●
To adjust contrast
The brightness of the screen is adjusted by varying the video signal level.
Adjustable range
0 to 100
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Contrast” in the “Color” menu, and press
.
The “Contrast” menu appears.
3. Use or for adjustment.
4. Press
to exit.
Note
• In the contrast of 50, every color gradation is displayed.
• When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the gradation
characteristics, prior to the contrast adjustment.
• Perform the contrast adjustment in the following cases.
- When you feel the image is too dark even if the brightness is set to 100 (Set the contrast to higher than 50.)
●
To adjust color temperature
Color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and / or “Black” by a numerical value.
The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the ame
temperature. A gain preset value is set for each color temperature setting value.
Adjustable range
Off, 4000 K-10000 K (specied by every 500 K unit, including 9300 K)
Procedure
1. Choose “Color” in the Setting menu, and press
.
2. Choose “Temperature” in the “Color” menu, and press
.
The “Temperature” menu appears.
3. Use or for adjustment.
4. Press
to exit.
Note
• The value shown in “K” is available only as reference.
• “Gain” allows you to perform more advanced adjustment (see “To adjust gain” (page 19)).
• If you set to “Off”, the image is displayed in the preset color of the monitor (Gain: 100 for each RGB).
• When gain is changed, the color temperature is changed to “Off”.

Eizo FlexScan S2133 Specifications

General

3D	Yes
HD type	UXGA
Pixel pitch	0.270 x 0.270 mm
Aspect ratio	4:3
Screen shape	Flat
Response time	20 ms
Display diagonal	21.3 \
Display resolution	1600 x 1200 pixels
Display technology	LED
Contrast ratio (typical)	1500:1
Display number of colors	16.78 million colors
Viewable size, horizontal	540 mm
Digital vertical frequency	49 - 76 Hz
Digital horizontal frequency	24 - 80 kHz
Display brightness (typical)	420 cd/m²
Supported graphics resolutions	720 x 400, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Quantity	1
HDMI ports quantity	0
USB upstream port type	USB Type-B
USB Type-A downstream ports quantity	2
Pivot angle	0 - 90 °
Tilt angle range	- °
Number of OSD languages	6
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	DEU, ENG, ESP, FRE, ITA, SWE
Thin client installed	-
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	45 W
Power consumption (off)	0.1 W
Power consumption (standby)	0.3 W
Power consumption (typical)	17.4 W
Certification	CE, TÜV GS, TÜV, ISO 9241-307, TCO 6.0
Product color	Black
Cables included	DVI, USB
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	209 mm
Height (with stand)	535 mm
Weight (with stand)	8600 g
Depth (without stand)	64 mm
Width (without stand)	465 mm
Height (without stand)	361 mm
Weight (without stand)	5600 g