4
When using Mesh Intercom, you can mute the
microphone with a short press of the < Intercom
Button >, so that the sound of your own voice will not
be sent to others.
Press <Intercom Button> to unmute.
Note: Only valid for Mesh intercom.
When using Mesh intercom, the system will enter a sleep mode when there is no speech detected.
Speaking will immediately activate the system and start the intercom. Users can adjust the voice
activation sensitivity to suit their own voice and avoid false activations or the need for excessively loud
sounds to activate the system.
There are 5 levels of sensitivity settings, default level 3. Level 5 has the highest sensitivity
and is the easiest to activate the system, level 1 has the lowest sensitivity.
When driving at high speed, please use low level to avoid wind noise to activate the
microphone, and speak loudly to activate the microphone; while at low speed, you can use
high level so that whispering can easily activate the microphone.
After turning on Mesh intercom, press and hold the
<Intercom Button>+<
Volume +> to cycle through
sensitivity.
1->5->1 cycle switching.
“Microphone Mute”
“Microphone unmute”
“{VOX n}（n is 1~5, indicating 5 levels）”
Mesh Intercom
Features: Intercom with up to 6 people, 5 channels in
total.If participating in campaign mode as a listener,
there is no limit to the number of people who can join the
intercom in a listen-only manner.
Microphone Mute
VOX Voice Sensitivity
When entering the Mesh intercom, Bluetooth music can be
played at the same time .
Mesh intercom is a multi-hop technology mesh network
intercom (Communication frequency 470-488MHz). On
account of large number of participants and unrestricted
location, people are able to move at will within the effective
range. It is not only superior to the traditional Bluetooth
chain intercom, but has a longer transmission distance and
better anti-interference ability.
1s
To Next Page
Loading...
