EKF Diagnostics DiaSpect Tm - 6. Installation and Operation; User Eligibility and Initial Setup; DiaSpect Tm Display Overview

7
DiaSpect Tm User Manual
6. Installation and Operation
Only healthcare professionals may use the DiaSpect Tm analyzer.
Please read this entire manual before using the analyzer for the first time. Follow
the instructions carefully when performing the test as not doing so may result in
inaccurate test results.
The DiaSpect Tm analyzer comes ready for use. No installation procedure is
necessary. The display is always ON. The analyzer does not have an ON/OFF
switch. When not in use, the analyzer remains in a low power mode.
The DiaSpect Tm analyzer may be used as a handheld device.
Understanding the DiaSpect Tm Display
Battery symbol
Shows battery charge status
Blinking:
Battery low
Hemoglobin value
Cuvette symbol
Visible:
Insert cuvette
Blinking:
Remove cuvette
Flash Symbol
Visible:
Connected to
power
Unit of measure
Checkmark
Shows valid reading
and passed self-check
Antenna Pole
Shows RF connection
status and signal
strength (only with
activated Bluetooth
®
option)
USB symbol
Shows USB
connection status
Visible:
Connected to host
Blinking:
Data transfer