Set up
HemoPoint
®
H2 User Manual
11
Place the analyzer on a level counter adjacent to a power socket.
Make sure there is enough room for the cuvette holder to be
freely accessible.
Illustration 2: Setting up the analyzer.
3.3 Switching the analyzer on and off
3.3.1 Using for the first time
Allow the analyzer to reach room temperature!
Changing from a cold to a warm environment (i.e. after storage or
transport), condensation can form both on the inside and the
outside of the analyzer. Wait at least 1 hour, before you connect
the analyzer to a power supply.
As the built-in battery has not yet been charged, the analyzer
must first be connected to the power adaptor (supplied) and
WARNING!
To Next Page
Loading...
