EKKO EB20E - b. Lubrication point

2
Function
32
Check the horn function.
•
33
Check air gap of solenoid value.
•
34
Detect emergency braking.
•
35
Detect the reverse braking and regenerative braking.
•
36
Check the emergency reverse switch function.
•
37
Check steering function.
•
38
Check lifting and lowering function.
•
39
Check the handle proximate switch function.
•
Comprehensive
40
Check whether all labels are clear and complete.
•
41
Check the bearing wheels and adjust the height, replace if it is worn.
•
42
Perform a test run.
•
b. Lubrication point
Lubricate the marked point according to the maintain list. The required grease specification is the DIN 51825
standard grease.
Picture.1: Lubrication point
Door frame guide
rail and
contact surface.
Chain