EasyManua.ls Logo

EKO KAC7 - Setting the Alarm and the Alarm Mode; Stopping the Alarm

EKO KAC7
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
BASIC OPERATION (CONT.)
SETTING THE ALARM AND THE ALARM MODE
1. In standby mode, press and hold (10) button for a few seconds
the display blinks.
2. Press (3) or (4) button to select the source of wake up
[BB] buzzer, or [F] radio.
3. Press (10) button then Press HR. (3) and / or MIN. (4) button to
set the time of wake up.
4. Press (10) to confirm, the alarm 1 indicator lights up.
NOTE:
- Same procedure applies for alarm 2 with (9) button.
- If you wake up with the radio, select your desired station, then long
press button to turn o the radio before the alarm time reaches.
For the station selecting, please refer to “LISTENING TO RADIO”.
- The previous level of listening is stored, the volume of the alarm will
be identical. If you wake up with the radio, do not forget to check
the volume level. Press (8) and (6) or (7) then
press (8) again.
- If you use the sleep mode with low sound level, you should use the
buzzer to wake you up.
STOPPING THE ALARM
1 ALARM REPETITION
Press SNOOZE (11) button. The alarm stops and will sound again
9 minutes later.
2 ALARM STOP
Press (8) or (10) button. The alarm 1 will sound again the next
day at the same time.
3 ALARM CANCELLATION
In Standby mode, press (10) button to cancel the alarm 1
permanently. The alarm 1 indicator lights o.
Note: Same procedure applies for Alarm 2 with (9) button.

Related product manuals