9
BASIC OPERATION (CONT.)
TUNING THE RADIO
1 When unit is powered on repeatedly press the (8) button to
select AM or FM band
2 Press and hold the (3) or (4) button to start the auto scan
proccess. MANUAL SEARCH - Press once to manually scan through
radio stations.
PRESET - You can store up to 10 FM and 10 AM Stations.
AUTOMATICALLY STORE RADIO STATIONS
In FM mode, press and hold (5) button for few seconds and the unit
will automatically save the first 10 FM stations. When you store on a
channel already been preset, the previous station will automatically be
cleared and replaced by the new station. Note: same procedure applies
for AM automatic storage when in AM mode.
MANUALLY STORE RADIO STATIONS
1. Repeatedly press (8) button to select FM or AM band.
2. Select a radio station manually or in automatic search.
3. Press (2) “P 01” blinks on the screen.
4. Press (3) or (4) button to select a channel.
5. Press (2) to save it.
6. Repeat steps 1-5 to store other stations.
LISTENING TO STATION PRESETS
Press (8) button to select FM or AM band. Then press (5) and
repeat the operation as many times as necessary to select your station.
Press (6) or (7) to adjust the sound level.
To Next Page
Loading...
