EasyManuals Logo

EKO KAC8Qi User Manual

EKO KAC8Qi
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
BASIC OPERATION
Antenna
Unwind and extend FM wire antenna to its full length for FM reception and place it
in the position. Which permits best reception.
If FM reception is weak, slightly rotate or re-position the unit to get the best
possible reception.
Power On/O
• Power on: Connect “DC IN “ port with supplied adapter into power socket.
Power o: Disconnected from power supply.
• Time memory: you can put 2 “AAA 1.5V” batteries on bottom battery holder, which
can power the clock time memory function when DC adapter was disconnected from
power supply.
Wireless Charging
When powered on, put your device (which with wireless charging function) on it to
charge, the blue indicator will light up on top of radio (blue light would be flash when
detects other subjects).
Bluetooth Pairing
When powered on, Press the “MODE” button until Bluetooth indicator turns on.
(this means that the Bluetooth mode has been activated).
Open the Bluetooth® settings on your phone, tablet or other Bluetooth enabled audio
device, make sure Bluetooth is on and search for “KAC8Qi”. When prompted for the pairing
code, enter “0000”.
Once paired, the Bluetooth icon will stop flashing and steady on.
This device will connect to your last connected Bluetooth device when enter Bluetooth
mode again.
To disconnected from Bluetooth device, long press the “Play/Pause” button and you will
hear a prompt tone, then other device can search for it and pairing.
Device will back to standby mode if not connected to any device in 10 minutes.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EKO KAC8Qi and is the answer not in the manual?

EKO KAC8Qi Specifications

General IconGeneral
BrandEKO
ModelKAC8Qi
CategoryClock Radio
LanguageEnglish

Related product manuals