9
BASIC OPERATION (CONT.)
Playing Music
• Select desired song or playlist on your phone, tablet or other Bluetooth enabled
audio device.
• Short press “Play/Pause” button to start or pause the music.
• Short press the “Pre” button or “Next” button to go to previous or next song.
• Short or long press the “V +/-” button to adjust the volume
Clock
• In clock mode, (standby mode, without listening to radio)
long press “Time Setting” (located at back of Radio) button and the
hour number will be flash, short press “MEM-/Pre” or “MEM+/Next” button to adjust hours,
short press “Time Setting” button again, the minute number will be flash, short press
“MEM-/Pre” or “MEM+/Next” button to adjust minutes, short press “Time Setting” button
again to save time setting and exit.
• When power on, the default time show as “12:08” PM, short press the “Time Setting”
button to switch 12H/24H time mode.
Alarm Mode
• In clock mode, (standby mode, without listening to radio)
short press twice “Alarm Clock1” button to turn on/o Alarm clock 1.
• When the Alarm 1 indicator lighting, long press “Alarm Clock1” button, the hour number will
be flashing, short press “MEM-/Pre” button or “MEM+/Next” button to adjust the hour.
• Once finish the hour setting, short press “Alarm Clock1” button, the minute number will be
flashing, short press “MEM-/Pre” button or “MEM+/Next” button to adjust the minute.
• Once finish the minute setting, Short press “Alarm Clock1” button, panel display “BUZ”,
short press “MEM-/Pre” button or “MEM+/Next” to select “RAD” FM radio or “BUZ” default
ring as alarm tone.
• Once finish the alarm tone setting, short press “Alarm Clock1” button to enter volume
adjustment, short press “MEM-/Pre” button or “MEM+/Next” button to adjust the volume
you need, short press “Alarm Clock1” button to save all settings and exit.
• To stop the alarm clock1 when it rings, short press the “Alarm Clock1” button and it will
stop and ring again in next day at the same time.
To Next Page
Loading...
Need help?
General
