13
PAIRING YOUR SOUNDBAR
Pairing with a Bluetooth Enabled Device:
Before you play music from your Bluetooth device, it needs to be paired with the Soundbar.
1. Once powered, press the button on the remote control or Side of soundbar to
activate pairing mode.
2. Now that the unit has entered pairing mode, on your smart device, select to
search for devices.
3. Select “KSB700H” in the list of devices that appear. The Soundbar will make a tone
once their is a successful connection.
4. To disconnect/unpair the devices switch to another mode on the soundbar or Disable
the Bluetooth on your device /or unpair the Soundbar from your smart device in settings.
5. Play your favourite music once you are connected.
NOTES:
• The Bluetooth range between the soundbar and your device is up to approx. 8 metres.
Obstacles may reduce connectivity range.
• This Soundbar may not be compatible with all Blueooth devices.
• With a Weak signal, your Soundbar may disconnect with your device, but it will continue
to stay in Bluetooth mode until signal strengthens.
• If you already have a device connected to the Soundbar, press and hold the Pairing
button for 2 seconds for the unit to go into pairing mode with the current
connection being disconnected.
To Next Page
Loading...
Need help?
General