The Battery Receptacle Box can be
opened by sliding the front side panel in
the direction as shown on the left for
inserting and replacing batteries.
Replace the batteries with 8 AA size
nickel-metal hydride (Ni-mH) batteries.
Turn ON the switch when the battery is
used for operation.
Ni-H type batteries cannot be
recharged with this unit; use the
charger attached to this instrument.
※ Do not use new batteries, old
batteries and different types of
batteries mixed together.
※Do not leave batteries inside the
battery receptacle box when the
MP-11 will not be used for a while.
Battery receptacle box can be stored
inside the Main Unit storing space.
Tilt the battery receptacle box to insert it
inside the storage space then fix it with
battery receptacle box fixing plate in
place using screws.
To Next Page
Loading...
