EKO MP-11 - MP-11 Applications; Case-by-Case Applications for MP-11

EKO INSTRUMENTS CO., LTD. I-V Curve Checker MP-11 Instruction Manual Ver.7
Pg. 20
6. MP-11 Applications
6-1. Case-by-Case Applications for MP-11
Categorizing MP-11 applications into the following cases, in the section introduces and explains each
application example and their task flows in simple overview.
 Measurements without PC control
Case 1: Measurements with Unit Only
Case 2: Measurements with Main Unit, Sensor Unit, and Thermocouples
Case 3: Measurements with Main Unit, External Pyranometer, Thermocouples
Case 4: Downloading Measurement Data on Main Unit to PC
Case 5: Uploading Measurement Data on PC to Main Unit
 Measurements with PC control
Case 6: PC-controlled Measurements with Main Unit Only
Case 7: PC-controlled Measurements with Main Unit, Sensor Unit, and Thermocouples
Case 8: PC-controlled Measurements with Main Unit, External Pyranometer, and Thermocouples
Following information are provided in the each application case; use this section for reviewing the overall
configuration of system and task flow, as well as for indexing the details for each measurement step.
 Measurement Items
 Intended use purpose and features
 Measurement System (used devices and cable connection overview)
 Overall procedure
 Reference Sections for details of each step
Following steps are necessary steps to take prior to the measurements using MP-11. Neglecting to take
these steps may lead to troubles such as unsuccessful measurements and measurement data with
mismatched dates/time.
Procedure
Referenced Sections
1
Open the MP-11 package and check the contents.
4-2. Package Contents
2
Check the Sensor Unit battery status
5-3. Setting
3
Turn ON the MP-11 Main Unit power.
8-2. Starting MP-11
4
Check the MP-11 Main Unit battery status.
5-1. Parts Name and Descriptions
8-2. Starting MP-11
8-3. Main Menu & Monitoring Screen
5
Setup the date and time on MP-11 Main Unit.
8-4. Setting Menu8-
6
Turn OFF the MP-11 Main Unit power.
8-2. Starting MP-118-