EKO MP-11 - USB Driver Installation

EKO INSTRUMENTS CO., LTD. I-V Curve Checker MP-11 Instruction Manual Ver.7
Pg. 56
9-2. USB Driver Installation
1. USB Driver Installation
The USB for MP-11 uses the device driver software by Future Technology Devices International Ltd. (FTDI).
There are 2 driver software provided by FTDI. Both driver softwares are included in the attached CD.
One is EXE-run type driver software, and this type of driver software is installed in Windows prior to
connecting the USB device to the PC. Another type of USB driver installation is that when the USB
connector is inserted to the PC, the wizard appears to process the installation.
Both driver softwares are included in the attached CD-ROM inside “USB” folder.
 Installing by EXE-run type driver
(1) Startup the [CDM v2.08.30 WHQL Certified for Windows 8.1.exe] with administrator authority
(2) , by right clicking the EXE-run driver and select the “Run as administrator ”
(3) Below window appears; click [Extract] to start the installation.
USB Serial Converter driver and USB Serial Port driver are installed.
Figure 9-2-1. Installing USB Driver with Administrator authority
Show the pull-down list
by right clicking the
program, select “Run
as administrator (A)…”
Figure 9-2-2. USB Driver Installation Start Window