EKO MP-11 - Software

EKO INSTRUMENTS CO., LTD. I-V Curve Checker MP-11 Instruction Manual Ver.7
Pg. 90
Table 11-1. Specification - Continued
Items
Specifications
Power Supply
Sensor
Unit
・ 006P Battery 9V x 1, consumption current: max. 60mA, 8 hours
continuous operation (Alkaline battery : recommended)
・ Power supplied from Main Unit when connected with Main Unit.
・ Power Supply LED: Blinking speed changes by the power supply
(battery) status).
 When connected to Main Unit: Blinks by 0.5sec. interval
 When in remote (battery) operation:
 1sec. interval: Has enough battery power
 0.5sec. interval: Power is getting low; replace the battery
 0.25 sec. interval: Almost no power remained (Cannot
communicate with Main Unit)
Dimensions
Main Unit
W230 x D320 x H180mm
Sensor Unit
W210 x D85 x H55mm (horizontal position)
Weights
Main Unit
2.5kg (without battery and accessories)
Battery Receptacle Box
500g (with AA size batteries x8pcs)
Sensor Unit
500g
Cables and Accessories
300g ( with AC adaptor and Ni-mH batteries x2)
Operation
Environment
Temperature Range
0℃ to 35℃
Humidity Range
35%RH to 85%RH (No condensation)
Storage
Environment
Temperature Range
-20℃ to 70℃ (Stored in original packaging)
Humidity Range
30%RH to 65%RH (Stored in original packaging)
*) All specifications are subject to being changed without any notice.