EKO INSTRUMENTS CO., LTD. - Pyranometer MS-80 - Instruction Manual Ver. 3
2. MS-80A
The MS-80A is a MS-80 with built in 4-20mA converter which can transfer data in long distance. Due to the
ultralow temperature dependency and non-linearity characteristics, the converter guarantees an optimal
sensor performance throughout year and day. For easy conversion, the MS-80 output by the integrated
converter is set to 4-20mA | 0 - 1600 W/m
2
.
With the optional USB controller and EKO Sense software (Multiple languages), the converter settings can be
freely changed.
Category of ISO9060: 2018
“Spectrally flat pyranometer of class A”
Key features:
Fast Response time (<1.5s@95%, <2s@99%)
Excellent temperature response over a wide temperature range (-20 to +50℃)
Measurements at long distances (Recommended maximum transmission range 1.2km when using
DC24V, AWG28 cable)
3. MS-80M
The MS-80M is a MS-80 with built in MODBUS RTU 485 converter which can be connected in series with
devices using the same communication protocol. It is also compatible to the industrial photovoltaic system
power conditioner input. Due to the excellent temperature dependency and non-linearity characteristics, the
converter guarantees an optimal sensor performance, throughout year. MS-80M can be used with
instruments connected with EKO Modbus Signal Converter MC-20 and MS-80M up to 100 units through BUS
connection. The digital signal from MS-80M can be converted to irradiance 0 - 1600 W/m
2
(default setting).
With the optional USB controller and EKO Sense software (Multiple languages) the converter settings can
be freely changed.
Category of ISO9060: 2018
“Spectrally flat pyranometer of class A”
Key features:
Fast Response time (<1s@95%, <1s@99%)
Excellent temperature response over a wide temperature range (-20 to +50℃)
Measurements at long distances (transmission distance 1.2km, theoretical value stated on EIA-485.
To Next Page
Loading...
Need help?
General
