EKO INSTRUMENTS CO., LTD. - Pyranometer MS-80 - Instruction Manual Ver. 3
A-3. Configurator Software (MS-80A, MS-80M)
With the EKO Sense Configurator software which can be downloaded from the EKO website and optional
controller, MS-80A and MS-80M configurations, such as output range and sensitivity, can be changed.
For MS-80A: EKO Sense USB Controller (optional)
For MS-80M: RS485/USB Conversion Cable (optional)
1. Software Installation
Install the special configurator software according to the following procedure
1) Download the recent version software “EKO Sense Configurator (Installer File, Compressed file: Zip
Format)” from the EKO website: http://eko-eu.com/
2) Open the installer file and click the execute file; the following window appears. Click [Next] button.
(Depending on the operating system, a dialog window for installation authorization may appear)
3) Select the location of installation from the [Browse] button then click [Next].
Figure A-1. Confirm Setup Settings Window
Figure A-2. Choose Destination Location Window