EKOM DO 2.1 - Storage and Transport; Technical Data

DO 2.1
DO 2.1-10
08/2018 - 5 - NP-DO2.1_10_08-2018


6. STORAGE AND TRANSPORT
The manufacturer provides sufficient protection of the appliance when it leaves the factory. Therefore the
product is protected against damage during storage and transport
Caution! For transport, always use the original packaging and, transport the appliance in
the upright position, using secure fixings.
Keep dry. Protect appliance against humidity and extreme temperatures during storage and
transport. Appliance in the original packaging must be stored in warm, dry and dust-free areas.
Keep packaging material if possible. If not, please dispose of the packaging material in an
environmentally friendly way. Cardboard can be recycled.
7. TECHNICAL DATA
DO 2.1 (*T)
DO 2.1 Z(*T)
DO 2.1-10 (*T)
DO 2.1-10 Z(*T)
Rated voltage / frequency
V / Hz
230 / 50
230 / 60 (*)
Performance of suction unit
under-pressure 5kPa
ltr.min
-1
800
Min. under-pressure of
suction unit
kPa
12
Appliance current
A
2.6
Noise level
dB(A)
 46
 58
 46
 58
Duty cycle
permanent - S 1
Dimensions of appliance
w x d x h mm
380x525x575
290x430x350
420x525x620
330x430x350
Dimensions of appliance in
cardboard w x d x h
mm
410x555x650
350x460x450
490x555x780
350x460x450
Weight of appliance
Kg
27
15
29
15
Weight of appliance in
cardboard
Kg
29
18
31
18
Version according to
EN 60 601-1
class I.
Notes: (*) – Rated voltage / frequency by special request
(**) – by special request