Online Functions
Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters
via Battery Manager software in the master machine.
Monitoring
Battery information can be monitored via three windows.
◇
Home screen
Battery bar and breif information can be read on home screen.
◇
Battery detail information window
Show smart battery data in real time and the data can be saved and printed in image format.
◇
Battery graph window
Voltage, current and capacity are traced in curves.
Control
Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the
related commands.
Parameters
Users can set working parameters via set parameter window in Battery Manager.
Others
◇
Active cooling
◇
Active batteries of zero voltage
When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the
battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to
active the battery.
◇
Battery identification
Battery information can be read from battery management chip after establishing communication.
◇
Intelligent protection
Against over-current, over-voltage, over-charge, over-heat and short circuit.
◇
Suitable for almost all laptop batteries, above 95%
Structure
Accessories
◇
1 x adapter
◇
1 x USB cord
◇
1 x CD
◇
13 x connectors
◇
10 x cables
◇
10 x jumpers
www.ekt2 .com
Electronics
Katrangi
Trading
To Next Page
Loading...