on LCD screen in real time.
◇
Active charge
If the battery needs to be activated, tester can not show any battery informaiton. In this case, you should
press the charge button to start up active charge. Tester will go into normal charge process after the
battery is activated successfully.
Time limit of active charge: 60 seconds
Test
Tester starts to test your battery after you press the test button. Charging / discharging current and test result
will be showed on LCD screen.
Online Functions
1) Connect tester to your computer via USB cord
2) Startup Battery Manager
3) Refer to Battery Manager User Manual
Remarks: Battery Manager software and USB drive program should be installed in your computer before you
use this function.
Cautions
◇
Use the fitted adapter. Nonstandard adapters might lead to working disability.
◇
To avoid explosion and danger, damaged batteries and leaking batteries are not allowed.
◇
The product is good for indoors. Do not expose and use it in outdoors.
◇
Do not drop or put something heavy on it.
◇
Children are not allowed to use the product without adults.
◇
Do not keep the product under the direct rays, beside the hot devices or in other hot environment.
◇
Do not disassemble or assemble the product.
www.ekt2 .com
Electronics
Katrangi
Trading
To Previous Page
Loading...