ekwb EK-Nucleus AIO CR240 Lux D-RGB User Manual

INSTALLATION MANUAL
EKNucleus AIO
CR360 Lux D-RGB / CR240 Lux D-RGB /
CR120 Lux D-RGB
Compatible with:
Intel Socket 115X/1200/1700/20xx CPUs
AMD Socket AM4 CPU
To ensure safe and easy installation, please carefully read
this manual before beginning the installation process!
1st Revision - September 27, 2021

ekwb EK-Nucleus AIO CR240 Lux D-RGB Specifications

General

Radiator Size	240mm
Radiator Material	Aluminum
Fan Size	120mm
Fan Quantity	2
Fan Connector	4-Pin PWM
Fan Dimensions	120 x 120 x 25 mm
Pump Noise Level	20 dBA
Tube Length	400 mm
Tube Material	Rubber
Lighting	Yes
RGB Lighting	D-RGB
Warranty	2 Years
Type	Liquid Cooling System
Pump	Yes
Socket Support	Intel LGA 1200, 1700, 115x, AMD AM4, AM5

Summary

Safety Precautions

Specifications

Installation - Intel LGA 115X/1200/1700 Socket

Step 1: Removing the Motherboard

Instructions for removing the motherboard from the PC case if needed.

Step 2: Attaching the Backplate to the Motherboard

Guide for installing the Intel backplate onto the motherboard.

Step 3: Attaching Mounting Screws

Details on how to attach mounting thumb screws to the backplate.

Step 4: Installing the Fans to the Radiator

Steps for attaching the fans to the radiator using screws.

Step 5: Removing the Cold-Plate Protective Cover

Instructions for removing the protective cover from the pump's cold-plate.

Step 6: Mounting-Brackets Installation

Steps for installing the mounting brackets onto the pump unit.

Step 7: Pump Unit Installation

Step 8: Installing the Assembly of Fans and Radiator into a PC Case

Step 9: Pump - Connecting Cables

Step 10: Fans - Connecting Cables

Installation - Intel LGA 20XX Socket

Step 1: Attaching Mounting Screws (LGA 20XX)

Installation - AMD AM4 Socket

Step 1: Removing of the Original Plastic Hold-Down Clamps (AMD)

Step 2: Attaching Mounting Screws (AMD)

Step 3: Installing the Fans to the Radiator (AMD)

Step 4: Removing the Cold-Plate Protective Cover (AMD)

Step 5: Mounting-Brackets Installation (AMD)

Step 6: Pump Unit Installation (AMD)

Step 7: Installing the Assembly of Fans and Radiator into a PC Case (AMD)

Step 8: Pump - Connecting Cables (AMD)

Step 9: Fans - Connecting Cables (AMD)

Optional Step! Applying the Thermal Compound