ekwb EK-MSI Z690 Carbon EK X User Manual

EK-MSI Z690 Carbon EK X
MONOBLOCK
USER GUIDE

ekwb EK-MSI Z690 Carbon EK X Specifications

General

Socket	LGA 1700
Chipset	Intel Z690
Form Factor	ATX
Memory Slots	4
Memory Type	DDR4
Max Memory Capacity	128 GB
Compatibility	Intel 12th Gen Core Processors
Mounting	Standard ATX
Audio	Realtek ALC4080
M.2 Slots	5
Cooling Support	Water Cooling
RGB Lighting	Yes
Thermal Pads	Included
PCIe Slots	3 x PCIe 5.0 x16, 1 x PCIe 3.0 x1

Summary

Box Contents

Preparing Your Motherboard

Removing Stock Cooler

Instructions for removing the existing CPU cooler and I/O cover screws.

Applying Thermal Compound

Cutting Thermal Pads

Placing Thermal Pads on the Motherboard

Placing the Block on to Motherboard

Step 1: Install Standoff Washers

Install M2.5 self-adhesive PVC washers under marked standoffs.

Step 2: Position Monoblock

Place the monoblock onto the motherboard, aligning mounting holes.

Attaching Block on the Motherboard

Step 1: Secure with Screws

Fasten the MOSFET and CPU parts using specified screws and washers.

Step 2: Check Orientation and Inlet Port

Ensure correct backplate orientation and identify the mandatory inlet port.

Technical Specifications and Water Block Parts

Connecting the D-RGB LED Strip

Required Tools

Support and Service

Social Media