ekwb EK-MSI Z690 Carbon EK X - Preparing Your Motherboard; Removing Stock Cooler

- 5 -
REMOVING STOCK COOLER
Remove all encircled screws. There are four (4) MOSFET screws on
the back of the motherboard that needs to be removed. Additional
two (2) screws needs to be removed to remove the plastic I/O cover.
Store the screws for later use. You can attach the I/O cover back,
after you mount the Monoblock.
PREPARING YOUR MOTHERBOARD
MOSFET
SCREWS
I/O
COVER
SCREWS