EasyManua.ls Logo

ELAC SUB 2090 - User Manual

ELAC SUB 2090
36 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SUB 2090
Bedienungsanleitung
Operating Instructions
www.elac.com

Table of Contents

Questions and Answers

  • M
    Matthew MarshallAug 11, 2025
    What to do if my ELAC SUB 2090 has no audible signal?
    • J
      James CookAug 11, 2025
      If your ELAC Subwoofer isn't producing any sound, there are a few things you can check: * **Mains fuse:** Examine and replace the mains fuse if necessary. * **Mains connection:** Verify the mains switch, plugs, and socket are properly connected. * **Input signal:** Inspect the input connections, try replacing the RCA cables, and confirm the signal source is working by testing it with another audio component.
  • A
    Alexander SanchezAug 20, 2025
    Why is the output level too low on my ELAC SUB 2090 Subwoofer?
    • C
      chelsea38Aug 21, 2025
      If the output level from your ELAC Subwoofer is too low, the issue might be with the source. The output level from the source (pre-amp, surround decoder) may be too low. Try increasing the output level of the pre-amp to a minimum of 0.2 Volts. To compensate, reduce the power amp again or slightly reduce the gain for the main (center, effect) speakers, and then increase the master volume.
  • E
    eswansonAug 31, 2025
    How to improve max output on ELAC Subwoofer in living-room?
    • O
      odonnellalexAug 31, 2025
      If the maximum output of your ELAC Subwoofer is slightly too low in your living room, it might be due to its placement. If the placement of the subwoofer is too “open”, try placing it in front of a wall or in a corner.

ELAC SUB 2090 Specifications

General IconGeneral
Driver Size10 inches
Amplifier TypeClass D
Phase Adjustment0° - 180°
Cabinet FinishBlack Ash
TypeActive
InputsRCA, LFE
OutputsSpeaker Level Output

Related product manuals