Need help?Do you have a question about the Elan Z-660 and is the answer not in the manual?
Key instructions for reading and retaining safety and operating information.
Adhere to all warnings and proper installation placement guidelines.
Guidelines for safe operation, maintenance, and servicing procedures.
Steps to protect the unit from lightning and environmental hazards.
Describes connectivity for audio sources and signal looping.
Front-panel gain controls for balancing individual channel listening levels.
Built-in IR passthrough for controlling source equipment via remote.
Front panel LEDs providing visual feedback on channel activity and status.
Easy button-press configuration for 120W bridged channels.
Feature to mute audio outputs using a remote signal.
Compact 1.75" height design offering high power in a small footprint.
Guidelines for proper placement, ventilation, and clearance.
Instructions for connecting speakers to the amplifier terminals.
How to connect impedance-matching volume controls to the amplifier.
Connecting line-level audio sources to the amplifier inputs.
Importance of proper grounding for safety and warranty.
Detailed steps for adjusting input levels on the front panel.
Basic setup for connecting the receiver to the amplifier.
Example configuration for powering three stereo zones from one source.
Example for powering two stereo and two mono zones.
Configuration example for one stereo and four mono zones.
Example for powering six mono listening areas.
Example for three independent stereo zones with separate sources.
Configuration for two stereo zones and two mono sub-zones.
Using bridged mode for high-power home theater channels.
Utilizing all six channels for surround sound audio.
Example configuration for a dual amplifier setup.
Connecting for bi-amplifying stereo speakers.
Guidelines for connecting multiple 4-ohm speakers with volume controls.
Guidelines for connecting multiple 8-ohm speakers with volume controls.
Diagnosing and resolving issues with no audio output from speakers.
Identifying and fixing causes of audible hum in the audio signal.
Addressing audio distortion at normal listening levels.
Troubleshooting weak audio, low bass, or unclear sound.
Resolving incorrect source input being played through speakers.
Steps to diagnose and fix power-on issues.
Troubleshooting IR signal transmission issues.
To Next Page
General
