Need help?Do you have a question about the Elan EL-IPD-AMP-2CH and is the answer not in the manual?
General| Amplifier Type | Class D |
|---|---|
| Channels | 2 |
| Impedance | 4-8 Ohms |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | >90dB |
| Total Harmonic Distortion (THD) | <0.1% |
| Input Impedance | 10K Ohms |
| Network Connectivity | Ethernet |
| Control | IP, RS-232 |
| Weight | 5.5 lbs |
| Input Sensitivity | 1V |
Details the amplifier's internal switch mode power supply for AC environments.
Connects the amplifier to the LAN for control and audio routing.
Describes available PCM digital and analog stereo pair audio inputs.
Instructions for connecting a powered subwoofer.
Guidelines for connecting speakers and managing impedance.
Points to external resources for detailed system configuration.
To Next Page
