SMARTASH 4 D-044 Rev 008
www.elastec.com
This manual contains information on the operation and maintenance of the
SmartAsh Cyclonic Barrel Burner manufactured by Elastec, Inc. All data in this
publication is based on the latest product information.
Elastec reserves the right to make changes at any time without notice and
without incurring any obligations.
If a problem is encountered, or if you have questions about your
Elastec equipment, please call one of our consultants at (618) 382-2525.
Elastec products are designed to provide safe are dependable service when
operated according to instructions. It is important to read and understand this
manual before operating this system. Proper Personnel Protective Equipment
(PPE) should be utilized, failure to do so may result in personal injury or equip-
ment damage.
Your SmartAsh serial number is _______________________________
SERIAL NUMBER MUST BE INCLUDED WHEN ORDERING PARTS.
INTRODUCTION
WARNING: This product is not for use with
materials containing liquids such as gasoline or
paint thinners. All materials must have a flash
point higher than 100 degrees Fahrenheit (38
degrees Celsius)!
CONTACT INFORMATION
Elastec, Inc. Telephone: +1 (618) 382-2525
1309 West Main Street Fax: +1 (618) 382-3610
Carmi, IL 62821 E-mail: elastec@elastec.com
USA Website: www.elastec.com
To Next Page